? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 1 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 6.5?9.5 ghz m/a-com products rohs compliant MAAP-000064-PKG003 part status: advance rev: a features ? 2 watt saturated output power level ? variable drain voltage (6-10v) operation ? msag ? process description the maap- 000064-pkg003 is a 2-stage 2.0 w power amplifier with on-chip bias networks in a 5mm, 20 lead pqfn package, al- lowing easy assembly. this product is fully matched to 50 ohms on both the input and output. it can be used as a power amplifier stage or as a driver stage in high power applications. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com?s gaas multifunction self-aligned gate (msag) process. the 5 mm pqfn package has a lead-free lead finish that is rohs compliant and compatible with a 260 o c reflow temperature. the package also features low lead inductance and an excellent ther- mal path. the mttf is 1,000,000 hours at 170 o c. primary applications ? multiple band point-to-point radio ? satcom ? ism band ordering information description die die sample brd part number maapgm 0064-die maap- 000064-smb004 ceramic pkg maapgm 0064 tape & reel (1000) maap- 000064-tr1000 tape & reel (500) maap- 000064-tr0500 yyww ap064g xxx macom 1. t b = mmic base temperature 2. adjust v gg between ?2.4 and ?1.3v to achieve specified idq. parameter symbol typical units bandwidth f 6.5?9.5 ghz output power p out 33 dbm 1-db compression point p1db 32 dbm power added efficiency pae 30 % small signal gain g 17 db input vswr vswr 1.8:1 output vswr vswr 2.5:1 gate c urrent i gg < 5 ma drain current i dd 1000 ma output third order intercept toi 40 dbm electrical characteristics: t b = 30c 1 , z 0 = 50 , v dd = 8v, i dq = 600ma 2 , p in = 18 dbm, r g = 120
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 2 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 6.5?9.5 ghz m/a-com products rohs compliant MAAP-000064-PKG003 part status: advance rev: a operating instructions this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -2.7 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 8.0 v. 3. adjust v gg to set i dq , (approximately @ ?2.0 v). 4. set rf input. 5. power down sequence in reverse. turn v gg off last. characteristic symbol min typ max unit drain supply voltage v dd 6.0 8.0 10.0 v gate supply voltage v gg -2.4 -2.0 -1.3 v input power p in 18.0 21.0 dbm thermal resistance jc 12.4 c/w package base temperature t b note 5 c recommended operating conditions 4 parameter symbol absolute maximum units input power p in 23.0 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 950 ma quiescent dc power dissipated (no rf) p diss 7.9 w junction temperature t j 170 c storage temperature t stg -55 to +150 c maximum ratings 3 3. operation beyond these li mits may result in permanent damage to the part. 4. operation outside of these ranges may reduce product reliability. 5. mmic base temperature = 170c ? jc * v dd * i dq
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 3 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 6.5?9.5 ghz m/a-com products rohs compliant MAAP-000064-PKG003 part status: advance rev: a figure 2. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. figure 1. 5x5 mm 20-lead mlp. refer to m/a-com application note surface mounting instructi ons for pqfn packages #s2083 * for assembly guidelines. additional precaution: all parts must receive a bake-out of 125oc for 24 hours prior to any solder reflow operation. *application notes can be found by going to the site search page of m/a-com?s web page (http://www.macom.com/application%20note s/ index.htm) and searching for the required application note. 4
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 4 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 6.5?9.5 ghz m/a-com products rohs compliant MAAP-000064-PKG003 part status: advance rev: a figure 3. demonstration board pn maap-000064-smb003 (available upon request). vgg gnd (twisted pair) r g yyw w ap 064 g xx x mac om vdd gnd (twisted pair) additional bypassing may be required if wires are longer than 12".
|